5
Installation (Cont.)
Extension Unit
4. Plug the Easy Jack Extension Unit into an electrical outlet where a
new phone jack is desired. Do not plug into a surge protector.
5. To verify the units are properly working, plug a normal phone into
the phone jack of the Extension Unit. Take the phone off hook.
If there is a dail tone, the Base and Extension Units are
communicating. If there is no dial tone, refer to the trouble
shooting section in this manual (Page 8).
6. The phone can now be disconnected from the Extension Unit.
A satellite receiver, DVR, computer modem, or other type of
dial-up modem can be connected to the Extension Unit and is
ready to operate.
Extension Unit
Wall
Phone Jack
Wall Outlet
Base Unit
Back of Computer or Satellite Receiver
Telephone Cord
