manualshive.com logo in svg

PhoneMate PM5805, Инструкция по эксплуатации

Поделиться
Скачать
PhoneMate PM5805 Скачать руководство пользователя страница 12

12

Making a call

1. Press 

TALK

.

Note

:  If handset is in the base cradle, remove it from base before pressing

the 

TALK 

key.

2. Dial the phone number.

3. Press 

TALK

 to end your call.

Volume adjustment

The 

VOLUME

 key adjusts the volume level of the earpiece. There are 4 volume

levels.
1. Make sure the phone is in TALK mode.
2. Press the 

CID/VOL 

 or 

 key on the handset.

Transfer a call (For PM5805 only)

The current conversation can be transferred to another handset.  Only one
handset can talk with an outside caller at a time.  The second handset cannot
listen to the conversation or make an outgoing call while the other handset is in
use.
1. During a call, press and hold the 

MUTE/FORMAT

 key, until “

TRANSFERRING

”

shows on the screen and both handsets beep.

Note:

 To cancel the transfer and return to the caller, press 

TALK

 key on the

handset.
2. Press 

TALK

 on the other handset to get the call.

Note:

 During call transfer, if there is no further action within 2 minutes on both

handsets, the call will end.

Ringer switch

The 

RINGER

 switch must be on for the handset to ring during incoming calls.

Call No.

Call Timer

Caller Name

Telephone Number

PM5821manual 21mar.p65

2006/5/12, ¤U¤È 05:49

12

Содержание PM5805






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды