PhoneMate PM5800 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 24

PhoneMate PM5800 Скачать руководство пользователя страница 15

- 15 -

Battery Installation

To install the 3.6V 600mAh cordless handset battery pack:
1. Slide open the battery compartment door on the back of the handset.
2. Plug the battery connector into the 2-pin connector in the battery compartment, and then insert

the battery.

3. Close the battery compartment door.
4. Place the handset on the base unit cradle.
5. Once you have installed the battery pack and placed the handset on the base you will hear a

tone indicating the handset has connected with the base and will successfully charge.

6.

IMPORTANT:

Charge the battery pack for at least 12 hours before using the handset the first

time.

7. The

CHARGE

LED on the base illuminates when the handset is properly making contact with

the charge terminals.

Battery Duration

A fully charged battery lasts for approximately:
• 5 hours when you use the handset continuously (talk time).
• 5 days when the handset is not in use (standby).

When the Battery Needs Charging

• The handset will beep.
• The

In Use/Low Batt

. LED will flash.

«
...
13
14
15
16
17
...
»

Содержание PM5800

























Отзывы:

Нет отзывов