INSTALLATION
Oscar must be installed suspended from the ceiling. The
best position, when Oscar is going to be the main speaker, is
to hang it above the operator (see picture). Moreover, if
placed equidistant from both ears, the effect of
omnidirectionality is also achieved.
Oscar’s position is not as important in the event of
monitoring a second receiver. We recommend to test it first
to find the best position for the operator.
To install the Oscar speaker, fix a hook in the desired
position. The hook must be strong enough to support the
weight of the speaker. Pass the cable through the hook,
adjust the desired height and use the Ubolt to lock it.
Tighten just enough not to damage the cable.
Calculate the necessary cable to the radio
socket. Cut the exceeding cable if
preferred and solder the connector.
SPECIFICATIONS
•Box material: .....................ABS
•Inside material: ................Acoustic Foam AG150
•Power:....................................25 W
•Impedance: ........................8 ohms
•Frequency response: ....150 18000 Hz
•Sensitivity: ..........................91 dB
•Driver protection: ...........IP44
•Diameter:.............................180 mm (7,08 in)
•Weight:..................................1,8 Kg (3,96 lb)
SAFETY
•Carefully read the section of your
transceiver manual describing the
speaker wiring.
•Clean the speaker using a dry cloth. If
required, you can slightly dampen the
cloth.
•Do not use solventbased cleaners.
CONTAINS
•1 Speaker
•1 Instruction manual
•1 mini Jack mono connector
•Ubolt
Phonema Speakers
www.phonemaspeakers.com
Содержание OSCAR-1
Страница 1: ......
