Phoenix RPC12 Series, Справочное руководство CLI

Страница: 100 / 245

Chapter 3 Command Descriptions 101
set auto-write-through-trigger
Description
Sets the trigger conditions that cause the controller to change the cache policy from
write-back to write-through. By default, automatic write-back is enabled. Alias:
set
awt
.
When the cache mode is changed, an event is logged.
Input
set auto-write-through-trigger controller-failure
|super-cap-failure|power-supply-failure
|fan-failure|temperature-exceeded|partner-notify|auto-write-back
enable|disable [...]
Parameter Description
controller-failure enable|disable
If the cache policy is set to
write-back, specify whether the
policy automatically changes to
write-through when a controller
fails.
super-cap-failure enable|disable
If the cache policy is set to
write-back, specify whether the
policy automatically changes to
write-through when cache
backup power is not fully
charged or fails.
compact-flash-failure
enable|disable
If the cache policy is set to
write-back, specify whether the
policy automatically changes to
write-through when the compact
flash fails.
power-supply-failure enable|disable
If the cache policy is set to
write-back, specify whether the
policy automatically changes to
write-through when a power
supply fails.