TEMPORARY SHUTDOWN
1. When blasting is complete, release the trigger and wait for airflow to stop. (There is a
short delay while residual ice is purged from the blast hose. Keep gun pointed at the
target until air stops flowing!) (pic 1)
2. Turn the Arm/Disarm switch counter-clockwise. The indicator will turn red, and the
momentary switch will return to the center position. (pic 2)
3. Close the air supply valve
at the source.
Important! Failure to disconnect the source
end of the air supply first may create potential “air entrapment” or “hose whip”
hazards!
(pic 3)
4. Vent remaining air from the machine and supply hose by closing the
E-Stop valve approximately halfway. (pic 4)
5. After the air stops flowing, you may fully close the E-Stop valve. (pic 5)
6. If moving the unit to another location for blasting, disconnect the supply hose at the
source and wrap around the machine handle for quick transport. It is not necessary to
disconnect the hose from the unit unless storing overnight or long term. (pic 6)
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
P
P
H
H
X
X
-
-
1
1
5
5
0
0
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Page 15
Pic 1
Pic 3
Pic 4
Pic 5
Pic 6
Pic 2
