© Copyright 2018, Phoenix Professional Audio GmbH, www.phoenix-pa.com
Phoenix logo is registered with the DE Patent and Trademark Office (TM)
All trademarks are the property of their respective owners
Instruction manual
- 5 -
ILA-1000
™
FRONT
1.- MIC.-1
This control determines the sensitivity of the „MIC-1“ input.
2.- MIC.-2/LINE
This control determines the sensitivity (volume) of the „MIC-2/LINE“ input.
3.- LINE
This control determines the sensitivity (volume) of the „LINE“ input.
4.- MASTER
This control adjusts the electrical current flow of the loop.
5.- MLC „METAL LOSS CORRECTION“
Regulator for correcting frequency response errors caused by metals near the induction loop.
Useful information:
Rotate the MLC control to get the best playback / transmission of the audio signal on the induction loop while
monitoring the audio signal via the headset with the ILA-E receiver. Repeat the measurement procedure for all
ILA-1000 induction loop amplifiers or induction loops bound in the system
6.- LOW-EQ filter (+-12dB)
Separate LF control of the individual microphone or LINE inputs.
7.- HIGH-EQ filter (+-12dB)
HF-EQ control in the range (+/- 12 dB), HF control of the individual microphone or LINE inputs.
8.- COMPRESSOR
LED display (3 dB to 33 dB)
9.- OUTPUT LEVEL
Output level LED display (-27 dB to 0 dB).
IMPORTANT:
In the event of a system malfunction (ERROR LED burning), no output level is displayed!
1
2
3
4
5
6
7
8
9 10 11
12 13
14
