Phoenix 440-ML
January 2020
3
3.
Installation Safeguards
•
Shipping damage should be brought to the immediate attention of the delivering
carrier
•
Avoid locating the laminator near sources of heat or cold. Avoid locating the
laminator in the direct path of forced, heated or cooled air
•
The receptacle must be located near the equipment and easily accessible.
•
Connect the attachment plug provided with the laminator to a suitably
grounded outlet only. This machine must have reliable earth wire to ensure the
safety of the machine during operations
•
Contact an electrician should the attachment plug provided with the laminator not
match the receptacles at your location
•
Ensure that the voltages of the power supply you are using match the rated
working voltages before operations. Do not use incorrect power supply
•
Do not use damaged wires or sockets. If abnormal conditions occur, switch
off the power supply first.
•
Only a licensed electrician should install wiring and outlet for the laminator
•
Do not defeat or remove electrical and mechanical safety equipment such as
interlocks, shields and guards
4.
Regulatory Compliance Statements
cTUVus Certification
This test mark, also referred to as the "cTUVus mark", serves as proof of compliance with US
national standards from UL adopted by OSHA and the Canadian national standards of CSA
adopted by the Standards Council of Canada (SCC). US Authorities having Jurisdiction (AHJs)
and Provincial Regulators across Canada recognize the cTUVus mark as proof of product
