RF ECO BT System Quick Guide
30.11.2016
Id-No. 85648(-)
6 / 6
2. Moving two systems in parallel using remote radio signals
CAUTION!
Only connect the electrical components when the power
supply is switched off.
Two systems can be moved and operated simultaneously (parallel mode)
using one RF remote.
Press the
Reset / Electrical reset function button
(4)
on the RF ECO
BT to move both systems to their end positions.
Execute the teach-in process first for system 1 and then for system 2.
Note that the teach-in processes are always sequential. The teach-in
should
never
be executed on two systems at the same time.
The systems are permanently paired together in this mode.
3. Cleaning and care
The system was designed so that it would be easy to clean.
Be sure to unplug the power cord on the power supply before you
begin cleaning it!
Clean the system using a dry antistatic cloth.
Be sure that you do not damage the connecting cables during the
cleaning.
4. Disposal
The system consists of electronic components, cables and metal and
plastic parts. You should observe all corresponding national and
regional environmental regulations when disposing of the system.
The disposal of the product is regulated in Germany by Elektro-G,
internationally by the EU Directive 2011/65/EC (RoHS), or by any
applicable national laws and regulations. (The product is not regulated
by the EU Directive 2012/19/EC (WEEE).)
The system should not be disposed of with
normal household waste!
DewertOkin GmbH
Weststraße 1
32278 Kirchlengern
Germany
Phone: +49 (0)5223/979-0
Fax: +49 (0)5223/75182
http://www.dewertokin.de
[email protected]
