background image

4

IPROXX SM/SM+/SMP

®

Handset IPROXX SM

®

Key Configuration

IPROXX SM

Example: Handset

with 9 adjustment keys.

®

Function LED

Mode LED

Lock symbol

Power-ON LED

Backrest                 up

Footrest                  up

down

down

Stroke adjustment  up

Reset
Back+footrest

down

down

Antitrendelenburg

up

Function of the locking device

turning the socket wrench

IPROXX handset  2 modes can be

released or locked.

DEWERT control unit

DEWERT drive

turning the socket wrench,

released

By

on the back of the

,

To put the handset into operation, connect it to a

or a

with integral control PCB. The keypad of the plugged in handset is

completely locked       (Mode locked).
The Mode LED next to the lock

, the Power-ON LED

By

the adjustment functions on the handset can be

, these vary depending on the model

The Mode LED next to the lock

, the Power-ON LED

®

?

?

1)

1)

doesn’t glow

glows dimly.

glows green

glows brightly

1)

Consult your customer contact beforehand in order to prevent any possible

to the product.

damage

(Mode released).

.

Rotary lock

Socket wrench

Back of handset

Back of IPROXX SM handset

®

Power On

02/2013

ID No. 56171

02/2013

ID No. 56170

Содержание DEWERT OKIN IPROXX SM

















Отзывы: