Amplifier Owner’s Manual
© 2011 Phoenix Gold • www.phoenixgold.com
SUBWOOFER CHANNEL SPECIFICATIONS
Frequency Response:
± 1dB from 20Hz to 300Hz
Signal to Noise Ratio:
>90dB
Subsonic and Low Pass Crossovers:
24dB per octave
Low Pass Crossover Range:
30Hz to 300Hz
Subsonic Crossover Range:
10Hz to 55Hz
Bass Boost @ 45Hz:
0 to +18dB
Low Level Input Range:
200 millivolts to 8 volts
Lowest Recommend Load:
1 ohm
Typical Efficiency:
80%
Damping Factor:
Greater than 200
FRONT AND REAR CHANNEL SPECIFICATIONS
Frequency Response:
± 1dB from 20Hz to 20kHz
Signal to Noise Ratio:
>110dB
High and Low Pass Crossovers:
18dB per octave
Front High Pass Crossover Range:
40Hz to 4kHz
Rear High Pass Crossover Range:
10Hz to 300Hz
Rear Low Pass Crossover Range:
40Hz to 4kHz
Low Level Input Range:
200 millivolts to 8 volts
Lowest Recommend Load:
4 ohm Bridged or 2 ohm Stereo
Typical Efficiency:
50%
Damping Factor
Greater than 200
Dynamic Power 14.4Vdc >1% THD
800 x 1 @ 2 ohm
1000 x 1 @ 1 ohm
RMS Power 14.4Vdc ≤ 1% THD
550 x 1 @ 2 ohm
800 x 1 @ 1 ohm
Dynamic Power 14.4Vdc >1% THD
100 x 4 @ 4 ohm Stereo
150 x 4 @ 2 ohm Stereo
300 x 2 @ 4 ohm Bridged
RMS Power 14.4Vdc ≤1% THD
90 x 4 @ 4 ohm Stereo
120 x 4 @ 2 ohm Stereo
240 x 2 @ 4 ohm Bridged
Specifications
OVERALL SPECIFICATIONS
Recommended Fuse Size:
150A
Minimum Power/Ground Wire Size:
1/0 Gauge
Dimensions:
28.2” L x 9.8” W x 2.5” H
716mm x 252mm x 62mm
