Amplifier Owner’s Manual
© 2010 Phoenix Gold • www.phoenixgold.com
MONOBLOCK SPECIFICATIONS
Frequency Response:
± 1dB from 20Hz to 300Hz
Signal to Noise Ratio:
>90dB
Subsonic and Low Pass Crossovers:
18dB per Octave
Low Pass Crossover Range:
30Hz to 300Hz
Subsonic Crossover Range:
10Hz to 55Hz
Bass Boost @ 45Hz:
0 to +18dB
Low Level Input Range:
200 millivolts to 8 volts
High Level Input Range:
400 millivolts to 12 volts
Lowest Recommend Load:
1 ohm
Typical Efficiency:
80%
Damping Factor:
Greater than 200
FOUR CHANNEL SPECIFICATIONS
Frequency Response:
± 1dB from 20Hz to 20kHz
Signal to Noise Ratio:
>110dB
High and Low Pass Crossovers:
12dB per Octave
Low Pass Crossover Range:
40Hz to 400Hz
High Pass Crossover Range:
40Hz to 400Hz
Bass Boost @ 45Hz: 0 to +18dB
Low Level Input Range:
200 millivolts to 8 volts
High Level Input Range:
400 millivolts to 12 volts
Lowest Recommend Load:
4 ohm Bridged or 2 ohm Stereo
Typical Efficiency:
50%
Damping Factor
Greater than 200
S1000.1
Dynamic Power 14.4Vdc >1% THD 750 x 1 @ 2 ohm
1000 x 1 @ 1 ohm
RMS Power 14.4Vdc ≤ 1% THD
550 x 1 @ 2 ohm
800 x 1 @ 1 ohm
Recommended Fuse Size:
80 Amp
Power/Ground Wire Size:
4 Gauge
Dimensions:
9.1” L x 6.9” W x 2.1” H
230mm L x 175mm W x 52mm H
S400.4
Dynamic Power 14.4Vdc >1% THD
50 x 4 @ 4 ohm Stereo
75 x 4 @ 2 ohm Stereo
150 x 2 @ 4 ohm Bridged
RMS Power 14.4Vdc ≤1% THD
40 x 4 @ 4 ohm Stereo
55 x 4 @ 2 ohm Stereo
110 x 2 @ 4 ohm Bridged
Recommended Fuse Size:
40 amp
Power/Ground Wire Size:
8 Gauge
Dimensions:
9.9” L x 6.9” W x 2.1” H
250mm L x 175mm W x 52mm H
Specifications
