www.phoenixgold.com
SPECIFICATIONS:
All parameters derived from measurements with voice coils wired in parallel.
Due to continual product improvement, all specifi cations subject to change without notice.
T/S Parameters
RSdC102/104 RSdC122/124
Re (Dcr ohms)
0.85/1.8
0.95/1.7
Fo (Hz)
33
30
Fo (Hz)
27.9
26.4
Sd (SqM)
0.0314
0.0515
BL (Tm)
7.57/11.01
SPL ([email protected])
92.6/89.3
Qms
4.04
4.61
Qes
0.461
0.549
Qts
0.414
0.491
Vas (liters)
27.8
Cms (um/N)
183.9
156.1
Mms (gms)
177.5
232.6
Power Handling (RMS)
600W
600W
Other Specifications
RSdC102/104 RSdC122/124
Xmax (mm)
14.8
VC (in)
2.5˝
2.5˝
Frequency Response (Hz)
29-300 27-250
Impedance (ohms)
2+2/4+4
2+2/4+4
Mounting Diameter (In/mm) 8.94˝ [227mm] 10.75˝ [279mm]
Mounting Depth (In/mm)
5.80˝ [147mm] 6.24˝ [159mm]
Voice coil options
RSdC woofers come in two distinct voice coil configurations: dual two ohm and dual four ohm. These two designs offer greater flexibility in system
design allowing a better matched speaker load for your chosen amplifier. Since there is no standard for optimum amplifier loads or a fixed number
of subs used in every application, we have illustrated the most common configurations to optimize performance with our mono-block amplifiers,
see illustration below. For further wiring illustrations we have provided a tutorial on our website in the support section at phoenixgold.com.
RSdC102/104/122/124
Competition Rated Dual Voice Coil Subwoofers
Product Manual
14.8
Parallel Wiring
Series Wiring
Series- Parallel Wiring
RSdC102/122 RSdC104/124
Series (single)
8 ohms
1.5˝
1.5˝
Parallel (single)
1 ohm
2 ohms
Series-Parallel (dual)
2 ohms
4 ohms
4 ohms
Wiring
8.17/10.93
94.2/91.7
58.7
Weight (lbs/kg) 16.5 [7.5] 17 [7.7]
Power Handling (Peak) 1200W 1200W
