Phoenix Gold MX Series, Руководство пользователя, Страница: 3 / 4

MX65CX - MX57CX - MX69CX
MX Series Coaxial Speakers
WARNING:
Audio Systems can produce sound levels over 135dB. Continuous exposure to sound pressure levels
over 100dB may cause permanent hearing loss. Please watch for emergency vehicles as warning
signals may not be heard.
SPECIFICATION MX65CX MX57CX MX69CX
PEAK Power 150 Watts 150 Watts 150 Watts
RMS Power 100 Watts 100 Watts 100 Watts
Frequency Response 59Hz-20KHz 67Hz-20KHz 55Hz-20KHz
Impedance 4 Ohm 4 Ohm 4 Ohm
Sensitivity 90dB 92dB 88 dB
Cone Material Polypropylene/Carbon Polypropylene/Carbon Polypropylene/Carbon
Tweeter Material Silk Silk Silk
Tweeter Size 25mm 19mm 25mm
FS 67hz 67hz 55hz
Vas 11.8cuL 10.9cuL 19.59cuL
Xmax 10mm 10mm 11mm
Qts 0.419 1.278 0.592
Overall Diameter
A
7.08in
180mm
5.51in x 8.66in
140mm x 220mm
7.25in x 10.18in
184mm x 258mm
Cutout Diameter
B
5.67in
144mm
4.96in x 7.16in
126mm x 182mm
6.02in x 8.78in
153mm x 223mm
Mounting Depth
C
2.28in / 58mm 2.20in / 56mm 2.95in / 75mm
WIRING GUIDELINES
Ensure the audio system is turned off before making any connections to the amplifier,
speakers or source unit. Failure to do so could result in permanent damage to the
audio system.
When wiring the speakers ensure that the wire is protected from sharp objects and always
use rubber grommets when wiring through metal panels.
Ensure all terminals and connections are protected from the vehicle chassis and from
each other as failure to do so could result in permanent damage to the audio system.
When connecting the speakers to the source unit or amplifiers ensure you connect the
positive and negative output wire from the source unit to the corresponding speaker
terminals. This will ensure the audio system will be in phase.