Phoenix Contact WP 04T Скачать руководство пользователя страница 7

Страница: 7 / 60

Important Notes

8361_en_02

PHOENIX CONTACT

Important Notes

1.1

Symbols

The symbols in this manual are used to draw your attention on notes and dangers.

There are three different categories of personal injury that are indicated with a signal word.

1.2

Safety Notes

–

Read this manual carefully before using the operating device. Keep this manual in a

place where it is always accessible to all users.

–

Proper transportation, handling and storage, placement and installation of this product

are prerequisites for its subsequent flawless and safe operation.

–

This user manual contains the most important information for the safe operation of the

device.

–

The user manual, in particular the safety notes, must be observed by all personnel wor-

king with the device.

–

Observe the accident prevention rules and regulations that apply to the operating site.

–

Installation and operation must only be carried out by qualified and trained personnel.

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER

This indicates a hazardous situation which, if not avoided, will result in death or serious

injury.

WARNING

This indicates a hazardous situation which, if not avoided, could result in death or serious

injury.

CAUTION

This indicates a hazardous situation which, if not avoided, could result in minor or moder-

ate injury.

NOTICE

This symbol together with the signal word NOTE and the accompanying text alert the

reader to a situation which may cause damage or malfunction to the device, hardware/

software, or surrounding property.

This symbol and the accompanying text provide the reader with additional information or

refer to detailed sources of information.

Содержание WP 04T





























































Результаты поиска

Содержание WP 04T

Отзывы:

Бренды по названию

Популярные бренды

Phoenix Contact WP 04T, Руководство пользователя

Результаты поиска

Содержание WP 04T

Отзывы:

Бренды по названию

Популярные бренды