Phoenix Contact UM IA THERMOMARK X1.1, Руководство пользователя

Страница: 111 / 130

Maintaining the Printer and Removing Errors
103180_00_ia PHOENIX CONTACT
4-11
English
4.2 Removing Errors
4.2.1 Error Types
When an error occurs, the diagnostic system displays the error on the screen and switches
the THERMOMARK X1.1 to one of three possible error states depending on the error type:
4.2.2 Solving Problems
Table 4-2 Error states
Symbol Navigator Pad Error Type
pause flashes
cancel lights up
Recoverable error
(see "Indicators During Printing" on
page 3-3).
cancel flashes Unrecoverable error
(see "Indicators During Printing" on
page 3-3).
— System error
(see "Indicators During Printing" on
page 3-3).
Table 4-3 Problem solving
Problem Cause Remedy
Ink ribbon creases Ink ribbon deflection is not adjusted See "Setting the Feed Path of the Ink
Ribbon" on page 4-8.
Head locking system is not adjusted See "Setting the Head Locking System" on
page 4-7.
Print image is blurred or
missing in places Printhead is dirty See "Cleaning the Printhead" on page 4-4.
Unfavorable combination of labels and ink
ribbon Use another type or brand of label
Printer prints a sequence of
characters instead of the
actual format Printer is in ASCII Dump Mode Exit ASCII Dump Mode
Horizontal white lines in the
print image Printhead is dirty See "Cleaning the Printhead" on page 4-4.
Print image is lighter on one
side Printhead is dirty See "Cleaning the Printhead" on page 4-4.
Head locking system is not adjusted See "Setting the Head Locking System" on
page 4-7.