Starting up the printer
108770_en_01
PHOENIX CONTACT
2.3.3
Connecting a printer via WLAN
Installing a WLAN stick
•
Insert a WLAN stick into the USB interface to the left of the display.
Setting up the WLAN connection
•
Activate the WLAN interface via the menu (see
•
Select Access Point. The search for available access points starts. The available ac-
cess points, including hidden access points, are shown on the display.
•
Select the access point. To use a hidden access point, enter its SSID.
•
Assign an IP address with subnet mask and gateway or select DHCP.
When you configure a WLAN connection via the website, do not change the “IP” and
“Gateway” parameters. Otherwise, the connection to the printer is interrupted.
•
For protected networks, the network key is requested. Enter the network key. The con-
nection is established. The network name and IP address are displayed.
2.3.4
Connecting a printer via Ethernet
To connect a printer via the Ethernet interface, use a cable with RJ45 connectors and the
10Base-T or 100Base-T transmission standard. Use a shielded cable.
•
Connect the printer to a network socket or a computer.
•
Set up the Ethernet interface via the menu (see
on
When you configure a WLAN connection via the website, do not change the “IP” and “Gate-
way” parameters. Otherwise, the connection to the printer is interrupted.
