Phoenix Contact THERMOMARK CARD 2.0, Руководство пользователя

Страница: 7 / 46

For your safety
108770_en_01 PHOENIX CONTACT
7 / 44
Damage to the device
– Only operate the device in locations that are dust-free as far as possible, dry and pro-
tected against splashwater.
– Protect the device and materials from humidity, damp, and dirt.
– Do not expose the device to direct sunlight.
– The device is equipped with a wide range power supply unit for AC voltages between
100 V and 240 V. The electrical connection conditions must comply with the details on
the rating plate.
Radio interference
This is a Class A item of equipment (EN 55032). When using the equipment in residential
areas, it may cause radio interference. In this case, the operator is obligated to take appro-
priate measures.
Notes on the printhead
The printhead is the most sensitive part of your printer. Improper handling can damage the
printhead.
During printing, always make sure that there is no contamination on the material as this
could be pulled underneath the printhead. This can damage the printhead.
The ink ribbon must be at least 5 mm wider than the material. Direct contact between the
printhead and the material can lead to increased wear on the printhead.