Primary and secondary interface setup for TC mGuard RS4000 4G
Configuring cellular as the primary Internet connection
6.
Navigate to Network >> Interfaces
7.
Choose “Built
-
in mobile network modem” from the Router mode drop down menu
8.
Click save in the upper right-hand corner and proceed to the last section:
Configuring the WAN port as primary Internet connection and cellular as secondary
9.
Navigate to Network >> Interfaces
10.
Under the general tab configure the WAN port as either static or DHCP under router mode.
a.
Choosing DHCP will configure the WAN port to receive an IP address and default
gateway automatically
b.
Choosing static requires the user to configure the IP address settings of the WAN port
manually. These settings can be found under the “External” tab on the Network >>
Interfaces menu.
Disclaimer: Internet Connection Setup
The TC mGuard RS4000 4G can use cellular as the primary connection to the Internet or connect
the WAN port to an upstream router for primary Internet connection with cellular as backup.
Please choose the appropriate subsection depending on your network requirements.
Содержание TC mGuard 4G Series
Страница 6: ...V00 Originalpublication...
