Phoenix Contact RAD-ISM-2400-SET-UD-ANT, Руководство пользователя

Страница: 8 / 13

PHOENIX CONTACT page 8 of 10
Unidirectional Wireless Transmission System – RAD-ISM-2400-SET-UD-ANT
Figure 13
Transmitter Receiver
Figure 14
Transmitter Receiver
5.3. System Versions
Point-to-Point
In the point-to-point system version, the set is
installed, the signals are connected, and the operating
voltage is applied. The radio connection is established
automatically – no other settings are required
(see Figure 13).
Point-to-Multipoint
In the point-to-multipoint system version, the set
(RAD-ISM-2400-SET-UD-ANT Order No. 28 67 283) is
installed, the signals are connected, and the operating
voltage is applied. The radio connection is established
automatically.
Signal paths can be divided or multiplied through the
installation of additional receivers (RAD-ISM-2400-RX
Order No. 28 67 306) (see Figure 14).