Phoenix Contact FL SWITCH 2005, Руководство пользователя, Страница: 58 / 98

FL SWITCH 2000
58
PHOENIX CONTACT 107065_en_01
Figure 6-3 Establishing a Telnet connection via Windows command prompt
Figure 6-4 Command terminal in Windows command prompt
6.3 Basic principles for using CLI commands
In this section, the CLI command names are written in bold. CLI parameters are written in
italics and must be replaced by appropriate values (e.g., names or numbers). If a command
has several parameters, the order of these must be strictly observed.
The parameters of a command may be mandatory, optional or a selection of values (see
Table “Structure of CLI commands” on page 58).
Table 6-1 Structure of CLI commands
Symbol Example Description
< > Angle brackets <Value> Denotes a mandatory parameter that must be entered in
place of the brackets
[ ] Square brackets [Value] Denotes an optional parameter that can be entered in place
of the brackets
{} Braces {choice1 | choice2} Denotes the mandatory selection of a value from a given list
of values
| Vertical bar choice1 | choice2 Separates mutually exclusive selection options
[{}] Braces within square
brackets
[{choice 1 | choice 2}] Denotes a selection within an optional parameter