Phoenix Contact FL EPA 2 Скачать руководство пользователя

Страница: 16 / 40

FL WLAN EPA

3-16

PHOENIX CONTACT

108452_en_02

3.1.1

Using the “MODE” button

Switch on the device and wait for the Link Quality LEDs to light up and go out again.

Then press and release the “MODE” button.

Step 1 must be

carried

out

within 5 seconds after switching on the device.

Press the “MODE”

button repeatedly to cycle through the Easy Config modes until the

desired mode is indicated by the A-B-C-D LEDs.

Mode 2 is the first mode. Only suitable LED combinations are shown.

Press and hold the “MODE” button for at least two seconds, then release the button.

This will confirm the selected mode and restart the device.

Step 3 must be carried out within 20 seconds after step 2. Otherwise the device will exit

Easy Config setup and return to the previous settings.

3.1.2

Easy Config modes

Modes 5 ... 8 are used for defining the operating mode of the network (WLAN/Bluetooth,

with or without optimization for PROFINET operation). Set the device which will later act as

an Access Point/NAP to the desired mode.

Configure the clients for mode 4. The Access Point or NAP then configures the devices in

mode 4, matching the selected operating mode. As soon as a device is configured as a cli-

ent, the device is restarted.

Table 3-1

Received signal strength indication via the A-B-C-D LEDs

Mode

Role

RSSI (WLAN client) / link quality (Blue-

tooth PANU)

---

Reset configuration to factory defaults

---

Reset IP settings to factory defaults

Client

Wait for discovery and configuration

WLAN AP

Configure the device as an Access Point, then

discover devices in mode 4 and configure

them accordingly as clients

Bluetooth NAP

Configure the device as an Access Point, then

discover devices in mode 4 and configure

them accordingly as clients

WLAN AP with

PROFINET

optimizations

Configure the device as an Access Point, then

discover devices in mode 4 and configure

them accordingly as clients

Bluetooth NAP

with PROF-

INET optimiza-

tions

Configure the device as an Access Point, then

discover devices in mode 4 and configure

them accordingly as clients

Add PROF-

INET optimiza-

tions only

Configure the device as an Access Point, then

discover devices in mode 4 and configure

them accordingly as clients

Содержание FL EPA 2









































Результаты поиска

Содержание FL EPA 2

Отзывы:

Похожие инструкции для FL EPA 2

Бренды по названию

Популярные бренды

Phoenix Contact FL EPA 2, Руководство пользователя

Результаты поиска

Содержание FL EPA 2

Отзывы:

Похожие инструкции для FL EPA 2

Бренды по названию

Популярные бренды