Phoenix Contact FL EPA 2, Руководство пользователя

Страница: 24 / 40

FL WLAN EPA 2
4-24
PHOENIX CONTACT 108452_en_00
Cloned MAC Address - Enter the MAC address for “Layer 2 cloned MAC only” (see
above).
4.1.5 WLAN settings - Access Point mode
Figure 4-6 “WLAN Settings” web page
Settings for “Access Point” mode.
Network (SSID) - Enter an SSID (network name).
Authentication Mode - Select the authentication/encryption mode to use for the Access
Point.
Open = No encryption (not recommended)
WPA2 = WPA2 PSK authentication with AES/CCMP encryption
Other authentication and encryption modes can be selected using AT commands.
WPA2 Passkey - Enter a string in plain text or hexadecimal format to use for authentication.
Channel Bands, Channel
Select both a frequency band and channel for the Access Point (the client follows the Ac-
cess Point settings).
The WPA2 passkey must consist of 8 ... 63 characters from the following character set:
1234567890

abcdefghijklmnopqrstuvwxyzäöüß

ABCDEFGHIJKLMNOPQRSTUVWXYZÄÖÜ

!§$%&/()=?{[]}+*#'-_.:;@€<>|µ
The characters " (ASCII 34) and , (ASCII 44) and \ (ASCII 92) may not be used.
Make sure to use an individual and secure password.