Phoenix Contact CLIPLINE CUTFOX 10, Руководство пользователя

Страница: 48 / 78

CUTFOX 10
1-2
PHOENIX CONTACT 102786_C00_ia
1.3 Correct Use of the Device
The CUTFOX 10 cutting machine cuts cables, litz wires, shrink sleeves and similar profiles
up to 8 mm in diameter, making is particularly well suited for series production.
The required length and number of wires is entered either directly on the CUTFOX 10 via
the keypad or can be processed and documented on the PC with the supplied software.
The CUTFOX 10 can be directly controlled and process the cutting commands from the PC
via the integrated RS-232 interface.
1.4 Work Places
The CUTFOX 10 is designed exclusively for cross cutting cables, litz wires, shrink
sleeves and similar profiles up to a diameter of 8 mm.
Only finely stranded copper litz wires up to 10 mm
2
and single-strand copper cables up
to maximum of 2.5 mm
2
may be used here. On no account may steel wires or similar be
used, as these would destroy the cutting blade.
Unauthorised modifications to the CUTFOX 10 are prohibited for safety reasons!
Correct use of the instrument includes observation of all the instructions and the pre-
scribed operating conditions.
The following places should be avoided for operation and storage:
– damp or dusty places,
– places exposed to high temperatures, direct sunlight or low temperatures
(operating range: 15°C to 35°C).
Condensation can form if the machine is moved from a cold place to a warm place.
– Before using the CF 1000, open the front door and allow any condensation to
evaporate.
– Do not spill liquids onto the CUTFOX 10.
– Do not expose the CUTFOX 10 to strong vibrations and impact.