Phoenix Contact AXC F 1152, Установка, запуск и эксплуатация

Страница: 18 / 113

AXC F X152
18 / 112
PHOENIX CONTACT 107708_en_08
3.5 Using SFTP to access the file system
The file system (on the internal parameterization memory and on the SD card of the control-
ler) is accessed via the SFTP protocol. An SFTP client software is required for this (e.g.,
WinSCP).
Access to the file system via SFTP requires authentication with a user name and password.
In the delivery state, the following access data with administrator rights is preset:
User name: admin
Password: printed on the controller (see Figure 3-2 ).
Figure 3-2 Administrator password on the controller
Please note:
Authentication with a user name and password is always required for SFTP access and
cannot be deactivated.
Only users with administrator rights can access the file system.
You can create additional users with administrator rights in the web-based management
system of the controller. For additional information, please refer to the
PLCnext Technology Info Center .
AXC F 1152 and AXC F 2152 AXC F 3152
SD-CARD
R
X4
MA
C A
ddr
.:
00.A0.45.9D13.BC
Or
d.
No
.2404267
AX
C F 2152
X1
X2
UL
a1 b1
b2 b1
scan her
e
for eas
y star
t up
BF-C
BF-C
SF
BOOT
EXT
FAIL
RUN
DBG
D
E
PLCnext Technology
Designed by PHOENIX CONTACT
pass
w
o
rd
:
12345678
www
.plcne
xt-community
.net
UL UL
a1 b1
b2 b1 b1
X2
BF-C
BF-C
SF
BOOT
EXT
FAIL
RUN
DBG
D
E
X1
X3
SD-CARD
RUN/PROG
X4
R
STOP
MRESET
password: 12345678
plcne
xtcommunity
.com
PL
Cne
xt Contr
ol
Or
d.-No 1069208
AX
C F 3152