Phoenix Contact 2702772 Скачать руководство пользователя страница 7

Страница: 7 / 90

For your safety

3785_en_B

PHOENIX CONTACT

For your safety

Read this user manual carefully and keep it to hand for future reference.

1.1

Labeling of warning notes

1.2

Qualification of users

The use of products described in this user manual is oriented exclusively to:

–

Qualified electricians or persons instructed by them. The users must be familiar with the

relevant safety concepts of automation technology as well as applicable standards and

other regulations.

–

Qualified application programmers and software engineers. The users must be familiar

with the relevant safety concepts of automation technology as well as applicable stan-

dards and other regulations.

1.3

Field of application of the product

1.3.1

Intended use

The devices described in this document is for use in industrial environments.

The Radioline wireless system is a Class A item of equipment and may cause radio

interference in residential areas. In this case, the operator may be required to implement

appropriate measures and to pay the costs incurred as a result.

This symbol indicates hazards that could lead to personal injury.

There are three signal words indicating the severity of a potential injury.

DANGER

Indicates a hazard with a high risk level. If this hazardous situation is not

avoided, it will result in death or serious injury.

WARNING

Indicates a hazard with a medium risk level. If this hazardous situation is not

avoided, it could result in death or serious injury.

CAUTION

Indicates a hazard with a low risk level. If this hazardous situation is not avoided,

it could result in minor or moderate injury.

This symbol together with the

NOTE

signal word alerts the reader to a situation

which may cause damage or malfunction to the device, hardware/software, or

surrounding property.

Here you will find additional information or detailed sources of information.

Содержание 2702772



























































































Результаты поиска

Содержание 2702772

Отзывы:

Похожие инструкции для 2702772

Бренды по названию

Популярные бренды

Phoenix Contact 2702772, Руководство пользователя

Результаты поиска

Содержание 2702772

Отзывы:

Похожие инструкции для 2702772

Бренды по названию

Популярные бренды