manualshive.com logo in svg

Phoenix Contact 2700988, Руководство пользователя, Страница: 72 / 162

Поделиться
Скачать
Phoenix Contact 2700988 Скачать руководство пользователя страница 72

AXC 1050 (XC)

72

PHOENIX CONTACT

8482_en_03

6.8

Using the SD card as the main memory or 

additional memory

The SD card can be used as main or as additional memory.

Figure 6-33 shows how to proceed to use the SD card as the main or additional memory.

Figure 6-33

Procedure for using the SD card as the main or additional memory

Information on using the SD card as the main or additional memory can be found in the fol-

lowing sections.

6.8.1

Main memory

If you use the SD card as the main memory, all application-specific data is stored on the SD 

card.

The SD card is recognized during initialization of the controller.

•

Make sure that the SD card is inserted before switching on the controller to enable the 

controller to use it as the main memory.

The controller can be operated with or without an SD card as required. When changing op-

erating modes (operating the controller with/without SD card), please note the following:

Do not remove the SD card 

during operation

The SD card must not be removed while the controller is running.

Should the SD card be accidentally removed during operation, the controller signals an er-

ror, stops processing the application program, and switches to the READY state. The FAIL 

LED indicates an error. If an online connection to PC Worx is established, the message win-

dow indicates that the SD card was unintentionally inserted or removed.

The function is available for controllers with a firmware version 

≥

 3.00 from 

AUTOMATIONWORX Software Suite 2017 Version 1.84 and later.

Settin

g

 in 

P

C W

o

rx:

P

re

f

erably, 

us

e the

external SD 

c

ar

d

a

s

 main mem

o

ry

Settin

g

 in 

P

C W

o

rx:

U

s

e external SD 

c

ar

d

a

s

 a

dd

iti

o

nal mem

o

ry

SD 

c

ar

d

 in

s

erte

d

 be

fo

re 

PL

C 

s

tart-

u

p

SD 

c

ar

d

 in

s

erte

d

 a

f

ter 

PL

C 

s

tart-

u

p

SD 

c

ar

d

 in

s

erte

d

 be

fo

re/a

f

ter 

PL

C 

s

tart-

u

p

SD 

c

ar

d

 i

s

 main mem

o

ry

SD 

c

ar

d

 i

s

 a

dd

iti

o

nal mem

o

ry

8385A019

The function is available for controllers with a firmware version 

≥

 3.00 from 

AUTOMATIONWORX Software Suite 2017 Version 1.84 and later.

NOTE: Potential data loss

If you remove the SD card during operation, this may result in a loss of data.

•

Do not remove the SD card during operation.

Содержание 2700988



































































































































































Отзывы:

Нет отзывов