Phoenix Contact 1184146 Скачать руководство пользователя страница 47

Страница: 47 / 52

Operating elements

109432_en_00

PHOENIX CONTACT

47 / 50

6.4

Approvals

6.4.1

FCC

The printer complies with the requirements of FCC Part 15 (B) Rules. Operation is

subject to the following two conditions: (1) This device may not cause harmful in

terference, and (2) This device must accept any interference received, including in

terference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installa

tion. This equipment generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful in

terference to radio communications. However, there is no guarantee that interfer

ence will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

6.4.2

ICES

Industry Canada ICES-003: CAN ICES—3 (B)/NMB-3(B)

Содержание 1184146





















































Результаты поиска

Содержание 1184146

Отзывы:

Phoenix Contact 1184146, Руководство пользователя, Страница: 47 / 52

Результаты поиска

Содержание 1184146

Отзывы: