Phoenix Contact 1108712, Руководство пользователя

Страница: 7 / 34

Description
4063_en_B PHOENIX CONTACT
7/34
2 Description
The GW PN/DP 1E/1DB9 provides a simple way to integrate PROFIBUS DP devices into a
PROFINET system. The GW PN/DP 1E/1DB9 supports up to 31 slaves connected directly
or a maximum of 125 slaves using repeaters.
Connect a PROFINET controller to the GW PN/DP 1E/1DB9 gateway via Ethernet cable.
Connect PROFIBUS DP slaves to the serial port of the GW PN/DP 1E/1DB9. The GW
PN/DP 1E/1DB9 gateway functions as a PROFINET IO device and a PROFIBUS DP-V0
and V1 master.
PROFIBUS DP slaves may be configured through the GW PN/DP 1E/1DB9 gateway using
an FDT/DTM container, such as PACTware.
The GW PN/DP 1E/1DB9 facilitates communication between a PROFINET controller and
PROFIBUS DP. The GSDML generator will export the GSDML files necessary for importing
into the PROFINET engineering environment. Once the GSDML files are imported to the
PROFINET engineering environment, the GW PN/DP 1E/1DB9 may be added to the project
and the PROFIBUS slaves may be connected to the corresponding slots. The PROFINET
slots 0 and 1 are reserved and the subsequent slots are labeled PROFIBUS address 0,
address 1, etc.
The GW PN/DP 1E/1DB9 initiates PROFIBUS communication when either an application
relationship (AR) is established from a PROFINET controller or when a supervisor AR is
established from a DTM used in an FDT/DTM container, such as PACTware. After the
initialization of the PROFIBUS communication, the GW PN/DP 1E/1DB9 will stop cyclic
PROFIBUS communication upon loss of the controller or supervisor AR.
OV
24V
P1
E1
BF
ST
GW PN/DP 1E/1DB9
PB
SF
1
4
5
2
3
Figure 2-1 Structure
Table 2-1 UM EN GW PN/DP 1E/1DB9 structure
Item Description
1 Power connector
2 D-SUB 9 serial port connector
3 Ethernet port (RJ45)
4 Reset button
5 Status LEDs