Phoenix Audio Technologies, 16 Goodyear Suite 120, Irvine, CA 92618; Tel (818) 937-4774
Fax (818) 859-1054
www.phnxaudio.com
Microphone Specifications & Set up
It is recommended that the four microphones delivered by Phoenix Audio are used in the setup for maximum quality.
The following is a guideline for placement and set up of the microphones to ensure the highest quality audio possible.
The microphones come with 3.5mm jacks and requires dismantling and consequential soldering/wiring to the pins.
(*It is advised that only trained engineers tend to such a task in order to ensure the quality of the final product)
If indeed you chose to use your own microphones, ensure that they have boots, and are identical in all aspects.
Place the microphones in the horizontal axis. (Do not place them vertically)
The spacing between the microphones should be 2in for optimal performance. However, they could be placed
1-3in apart. (Do not place closer than 1in apart)
Mount the microphone by drilling the holes onto the kiosk console or in a microphone box, and mount with
the microphone boots. (*ensure that the microphone enclosure has ample space and that the microphones
are facing the front of the kiosk, directly in front of where microphone input is received)
A cloth, foam cover, or grill should be placed in front of the microphones to reduce wind distractions and
increase pick up clarity
Ideally 2in. (can be
between 1-3in)
Note: Horizontal
Layout. Plastic
Console not
included
1in
