TECHNICAL DATA
I.
36 Chip Micro Lens LED Array Module
The
Ichip Mystére
uses
a
5600K, 90 CRI 36 chip Micro lens LED Array Module.
The
internally mounted ballast
is used to operate the
LED Module
from standard 120 volts.
The
L
ED array module
life
span
is
on
average of
6000
hours
. H
owever at normal use it is
rated
well beyond
6000
hrs.
Once the LED module reaches the 6000 hour mark, one or
two of the LED Micro chips may expire. However this will not noticeably effect the light
output of the Ichip Mystére, which will continue to operate well past the 6000 hour mark.
CRI (color rendering index) is a measure of how accurately a light source illuminates
objects' true colors. Our LED modules have a CRI value of 90, indicating that
the
modules are able to produce white light that approximates halogen or incandescent
lighting and natural daylight.
The
LED Module
is cooled by
two specially designed
fan
s
to
insure
cool and quiet
o
peration. One
fan is chassis mounted
below the
LED module while the
second fan is mounted directly onto LED Module
. Th
e
fan
s
are
essential to lamp
operation. Improper cooling will cause decreased
LED module
life.
A
llow
LED
Module
to
cool before cutting power.
II.
ELECTRIC
AL
I. LED Module Replacement
I
nstallation
1.
Turn off and unplug unit.
2. Remove
the eight
carry handle mount screws and four housing mount screws
located
on both sides of housing.
3.
Remove the two
black
control handle
knobs
from the
control shafts
.
4.
Lift and remove housing from chassis.
5.
Unscrew the
four LED module cooling fan button head screws followed by the four
LED module
Button head mount screws. For easier access to the LED module
mount screws, The LED module mount bracket may be removed by unscrewing the
four phillips screws located on the underside of the chassis.
6. Replace the LED module and LED module cooling fan by reversing the above
steps
Ichip Mystére
ICM-150/120 User Manual
5
The I
chip Mystére
operates on 1
10
to 12
0
V 50/60Hz A.C.
and
draw
s Less than
7 amps
.
(replace using 7A 3AB Bussman fuse
) Located at
the
rear
inside
of the
unit
you will find
the internally mounted
Ballast used to supply the lamp with the proper voltage and
current.
There are no user
serviceable parts located on this ballast!!
Refer to the
trouble shooting guide located
on page 6 of this manual, or contact the local dealer/
representative in your area.
MAINTENANCE
