Phoebe LED Spectrum 10W RGB, Руководство по установке

Страница: 4 / 28

4 Installation & App Instructions
1 Product Installation
This product must be installed by a qualified electrician ensuring
to follow all current wiring regulations.
Ensure mains power is switched OFF before starting installation.
Step 1
Mark the desired light position and carefully cut out a hole of 67-70mm diameter.
See product space requirements shown on page 6.
Step 2
Wire the easy connector head into the mains circuit according to the wiring
diagram on page 6.
Push the easy connector head together with the product driver, ensuring a secure
connection is made.
Step 3
Retract the spring arms and push the light into position.
Step 4
Attach your preferred magnetic bezel to the face of each light.
Step 5
Turn on mains power and follow the control app set-up instructions on
page 7.
!