www.phocos.com
5 |
P a g e
10.
Once the settings have been applied, exit the settings menu by pressing
to return to the main view.
11.
Check that the battery icon
outline is flashing permanently to indicate the communication
connection between the Any-Grid(s) and battery racks is successfully established. This may take a few
minutes.
12.
If no warnings or errors are shown, proceed to check the successful communication connection:
Press the
or
button on the Any-Grid to which the battery racks are connected to cycle through
the screen views. The number of battery racks and battery groups are shown in the information screen view
before the “Main unit firmware version (U1)” as shown below:
Information
Screen View Example
Battery rack and battery group
quantity
Battery parallel rack quantity = 8, battery group quantity = 2
If errors or warnings are shown, consult the Any-Grid manual for details. Warning codes 60, 61, 69 and 70 are
specific to Lithium battery communication functionality.
13.
Activate the circuit breakers or insert the fuses to energize the various inputs and outputs on the Any-Grid in
the following order (skip any that are not connected):
a)
AC input
b)
PV input
c)
AC output
The commissioning and programming of the battery-related settings of the Any-Grid is now complete.