20141229 V2
3
I.
Introduction
ZE6000/ ZE6000
+
is a Zero Client Audio/Video over Ethernet Adaptor, designed as an endpoint
of a PC sharing solution such as Windows MultiPoint Server 2012 or Userful Multiplatform.
With Windows MultiPoint Server 2012, or with Userful Multiplatform it can work as a
standalone workstation.
The solution enables a host PC(Server) to communicate with multiple and independent stations.
Each station is consisted of one Adaptor (zero client) with a keyboard, mouse, and monitor
connected, allowing multiple users to share the resources/computing of one single server.
By simple Ethernet connection, the server provides each station user with a familiar and
independent Windows® experience.
ZE6000
+
is a ZE6000 add with embedded access code in order to use Phistek special software
application, such as eSignage
+
Features
-
Simple Ethernet connection
ZE6000/ ZE6000
+
connect to Host server through Ethernet cable connection, this type of
connection can exceed the length limit of other signal connection such as VGA, USB. This also
gives the flexibility of system layout.
-
Simple plug and play
Just attach a keyboard, mouse, and monitor to your ZE6000/ ZE6000
+
, and connect it to the host
server.
A station is set up easily and ready for use right away
-
Easy and convenient installation
Designed with VESA standard mounting on the adaptor box;
75mm x 75mm and 100mm x 100mm
-
Provides three types of video signals for end user to select
DVI (through a DVI to DVI cable)
VGA (by an attached DVI to VGA dongle)
HDMI (through a DVI to HDMI cable)
-
Reset:
To reset IP address
-
Audio Line out
-
Headphone out
-
Microphone in/ou
t
Unpack the Adaptor
-
Put the AV Adaptor on a clean surface; make sure the box in upright position.
-
Remove packing materials from inside of box.
