background image

17

English

3140 115 31851

Tape Operation / Recording

Tape playback

1

Select 

TAPE

 source.

The display shows 

TAPE

 briefly. The tape

counter 

TAPE 000

 

display with the 

SIDE

 

A

 or

SIDE

 

B

 and reverse mode status are then shown

during tape mode.

2

Press 

OPEN•CLOSE

 

3

 to open the tape

door.

3

Insert a recorded tape and close the tape door.

Load the tape with the open side downward and
the full spool to the left.

4

Press 

PLAY•PAUSE

 

2;

 (on the remote

control 

2;

) to start playback.

5

By pressing 

¡1 

or

 

2™ 

on the system (on the

remote control 

à

 

or

 

á

), fast winding of tape is

possible in both directions.

During fast winding, you can monitor the tape
message with the tape counter.

6

To stop the tape, press 

STOP

 

.

To reset the tape counter, press 

STOP 

9

 again.

Note:
– The sound source cannot be changed while
recording a tape.

Switching tape sides

The tape side can be switched manually or
automatically before or during tape playback.

Press 

SIDE A/B

 (during playback only 

2;

 on

the remote control).

The display shows 

SIDE

 

A

 or 

SIDE

 

B

 and the

tape counter resets to 

000

.

Reverse mode options

Press 

REV MODE

 repeatedly to select your

option;

å

: playback stops at the end of the tape.
: both sides are played once.
: both sides are played repeatedly, up
 to 5 times each side.

General information on
recording

Recording is permissible insofar as copyright or
other rights of third parties are not infringed.

For recording, use only NORMAL (IEC type I)
tapes on which the tabs have not yet been
broken. This deck is not suited for recording on
METAL (IEC IV) type tapes.

The best recording level is set automatically.
Altering the VOLUME, INCREDIBLE
SURROUND, DBB or INTERACTIVE SOUND
controls will not affect the recording in progress.

At the very beginning and end of the tape, no
recording will take place during the 7 seconds
when the leader tape passes the recorder heads.

To protect a tape from accidental erasure, have
the tape in front of you and break out the left
tab. Recording on this side is no longer possible.
If, however, you wish to record over this side
again, cover the tabs with a piece of adhesive
tape.

Содержание XX-MC260/22
























Отзывы: