19
English
3140 115 30053
Clock/Timer
BAND
RDS
CLOCK
TIMER
ON
OFF
PREV
NEXT
STOP
iR
PLAY•PAUSE
SOURCE
SELECT
SHUFFLE
STANDBY-ON
PROGRAM
REPEAT
Setting the timer
●
The system can be used as an alarm clock,
whereby the CD or TUNER is switched on at a
set time. The clock time needs to be set first
before the timer can be used.
●
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
In any mode, press
TIMER ON•OFF
for more
than 2 seconds.
2
Turn
VOLUME
clockwise (or press
SELECT
SOURCE
) to select sound source.
3
Press
TIMER ON•OFF
to confirm your
desired mode.
➜
The selected source
CD
or
TUNER
TUNER
is shown. The clock digits for the hours flash.
4
Turn
VOLUME
to set the hours: clockwise for
hours up; anti-clockwise for hours down.
5
Press
TIMER ON•OFF
again.
➜
The clock digits for the minutes flash.
6
Turn
VOLUME
to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
7
Press
TIMER ON•OFF
to confirm the time.
➜
The timer is now set and activated.
Activating and deactivating
TIMER
●
In standby or during playback, press
TIMER ON•OFF
once.
➜
Display shows
TIMER
if activated, and
disappears if deactivated.
Setting the clock
There are two possible methods for setting the
clock: manually or automatically by using RDS.
Automatic clock setting
(RDS versions
only)
1
Tune to a RDS station (see Radio Reception).
2
Press
CLOCK
for more than 2 seconds.
➜
SEARCH RDS TIME
is displayed for a
maximum of 90 seconds; the time is then
displayed.
➜
NO RDS TIME
is displayed if no time signal
has been received and you will have to set the
clock manually.
Manual clock setting
1
In standby, press
CLOCK
.
➜
The clock digits for the hours flash.
2
Turn
VOLUME
to set the hours: clockwise for
hours up; anti-clockwise for hours down.
3
Press
CLOCK
again.
➜
The clock digits for the minutes flash.
4
Turn
VOLUME
to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
5
Press
CLOCK
to confirm the time.