26
EN
Register the handsets
You can register additional handsets to the base
station. The base station can register up to 4
handsets.
1
Select
[Menu]
>
[Services]
>
[Register]
,
then press
[OK]
to confirm.
2
Press and hold on the base station for 5
seconds.
Note
•
For models with an answering machine, you hear a
confirmation beep.
3
Press
[OK]
to confirm.
4
Enter the system PIN. Press
[Clear]
to
make corrections.
5
Press
[OK]
to confirm the PIN.
»
Registration is completed in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
•
If the PIN is incorrect or no base is found within a
certain period, your handset displays a notification
message. Repeat the above procedure if registration
fails.
Note
•
The preset PIN is 0000. No change can be made on it.
Select the recall duration
Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[Short]
,
[Medium]
and
[Long]
. The number of
available options varies with different countries.
For details, consult your service provider.
1
Select
[Menu]
>
[Services]
>
[Recall time]
,
then press
[OK]
to confirm.
2
Select an option, then press
[OK]
to
confirm.
»
The setting is saved.
Dial mode
Note
•
This feature only applies to models that support both
tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
Set the dial mode
1
Select
[Menu]
>
[Services]
>
[Dial mode]
,
then press
[OK]
to confirm.
2
Select a dial mode, then press
[OK]
to
confirm.
»
The setting is saved.
Note
•
If your phone is in pulse dial mode, press during a
call for temporary tone mode. Digits entered for this
call are then sent out as tone signals.
