Philips vs0040/00, Инструкция по эксплуатации

Страница: 3 / 8

Operation
Switching on
• Press button A (LED lights up).
Picture
• Adjust brightness with knob .
• Adjust contrast with knob N.B. The
image has been set correctly when the
background is no longer visible and you
can only see the characters.
Sound (if available)
Adjust volume with knob
Controls (rear panel)
•
Image width can be adjusted with
knob
• With the help of a screwdriver control
& can be adjusted to straighten the
image.
• If the image starts to slip, it can be
stabilised with knob
• You can adjust the image height with
knob
• You can move the image to the left or
the right with knob
Connections (rear panel)
The monitor is fitted with two Phono
sockets for audio and video input. A
connection cable type AV 7101 0001 is
supplied with monitor VS 0040/00.
Using this cable, the Phono socket on the
monitor can be connected to the DIN
socket on the Philips MSX computer. If
you connect your monitor to a different
home or personal computer, in most
cases it will not be possible to use the
connection cable supplied. Connection
cables for most types of home and
personal computers are available from
your dealer.
General
• If the picture is not as desired, check
whether all controls are in the correct
position.
• If there is a bright white line on the
screen, switch the monitor off and
consult your dealer.
• The rear panel should only be removed
by a service technician.
• If necessary, clean with a damp
sponge. Do not use alcohol, spirits or
ammonia.