D
Use the
SELECT.
button to switch ’VPS/PDC’ on or
off in ’
START
’.
D
Use the
SELECT.
button to select the recording
speed ’SP’ or ’LP’ in ’
END
’.
g
Confirm with the
OK
button when the information is
correct.
D
The programming information has been stored in a
TIMER block.
h
To end, press the
TIMER
k
button.
i
Make sure that the cassette you have put in can be
recorded on.
j
Switch off with the
STANDBY
m
button.
The programmed recording will only function when the
video recorder is
switched off
with the
STANDBY
m
button.
D
If any of the TIMER blocks are in use, ’
k
’ will light up
on the video recorder display.
D
While a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press the
STANDBY
m
button.
D
If the video recorder is switched on a few minutes
before a programmed recording is supposed to
begin, ’
SWITCH TO STANDBY - TIMER
RECORDING
’ will flash on the TV screen.
D
If you reach the end of the cassette during a
recording, the video recorder will automatically
eject the cassette.
D
If you forget to load a cassette, ’
NO CASSETTE
’
will appear on the TV screen and ’
k
’ will flash on the
video recorder display.
D
If you have put in a cassette which cannot be used
for recording, the video recorder will automatically
eject it.
D
If ’
TIMER FULL
’ appears on the TV screen when
you press the
TIMER
k
button, you have used up all
the available TIMER blocks. If you want to clear or
check a TIMER block, select it with the
P
;
or
P
=
button.
D
Programme number ’
AUX
’ is provided for audio
recordings via sockets
AUX IN L R
.
Programming a recording
(without ’SHOWVIEW’)
a
Switch on the TV set and select the programme number
for the video recorder.
b
Press the
TIMER
k
button on the remote control.
The programming mode selected last is marked.
c
Select the line ’
TIMER PROGRAMMING
’ with the
P
=
or
P
;
button and confirm with the
P
button.
TIMER
TIMER PROGRAMMING
VPS
DATE
PROG.
START
PDC
END
LP
01
BBC1
20:00
21:30
________________________________
TO STORE
MO-FR/WEEKLY
PRESS
SELECT
PRESS
OK
d
Select the entry field with the
Q
or
P
button.
e
Enter information with the
P
=
or
P
;
button or with
the digit buttons
0-9
.
D
Under ’
DATE
’, use the
SELECT.
button to select
daily or weekly programming.
’
MO-FR
’
: Recording from Monday to Friday.
’
MO
’
: Recordings every week on the same day.
D
Under ’
START
’, use the
SELECT.
button to switch
’VPS or PDC’ on or off.
D
Under ’
END
’, use the
SELECT.
button to select the
recording speed ’SP’ or ’LP’.
f
Confirm with the
OK
button when the information is
correct.
D
The programming information has been stored in a
TIMER block.
g
To end, press the
TIMER
k
button.
h
Make sure that the cassette you have put in can be
recorded on.
i
Switch off with the
STANDBY
m
button.
The programmed recording will only function when the
video recorder is
switched off
with the
STANDBY
m
button.
D
If any of the TIMER blocks are in use, ’
k
’ will light up
on the video recorder display.
20
