31
8
Switch off with
STANDBY/ON
m
.
The programmed recording will only function when the video
recorder is
switched off
with
STANDBY/ON
m
.
If any of the TIMER blocks are in use, '
k
' will light up on the video
recorder display.
Problems and solutions for programmed
recordings
PROBLEM
SOLUTION
The video recorder
will not operate
b
While a programmed recording is being made, you cannot operate your video recorder manually.
If you want to cancel the programmed recording, press
STANDBY/ON
m
.
'
SWITCH TO
STANDBY- TIMER
RECORDING
' flashes on
the TV screen
b
The video recorder was switched on several minutes before the start of a programmed recording.
Switch off the video recorder with
STANDBY/ON
m
. A programmed recording (timer) will
only function if the video recorder is switched off.
Cassette is ejected
during recording
b
The end of the tape was reached during recording.
Error message: '
NO
CASSETTE
'
k
' will flash
in the video recorder
display
b
No cassette was inserted. Insert a cassette and switch off the video recorder using
STANDBY/ON
m
.
Cassette was ejected
as soon as the
OK
button was pressed
b
A cassette was inserted with the security tab removed. Undo the erase protection (chapter
'Manual Recording', section 'Preventing accidental erasing of cassettes') or insert a different
cassette.
Error message: '
ALL
TIMERS OCCUPIED
'
b
If this error message appears after pressing
TIMER
k
, then all TIMER blocks are already
programmed. No more recordings can be programmed. If you want to clear a programmed
recording (TIMER block), select it with
P
;q
or
P
=r
and then press
CLEAR (CL)
.
ENGLISH
Programming a recording (TIMER)
Содержание VR670B/58
Страница 5: ......
