Philips VR205/05, Руководство по эксплуатации

Страница: 20 / 25

D
If any of the TIMER blocks are in use, ’ k ’ will light up
on the video recorder display.
D
While a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press the
TV/STANDBY
m button.
D
If the video recorder is switched on a few minutes
before a programmed recording is supposed to
begin, ’
TIMER RECORD ’ will flash on the TV
screen.
D
If you reach the end of the cassette during a
recording, the video recorder will automatically
eject the cassette.
D
If you forget to load a cassette, ’ NO CASSETTE ’
will appear on the TV screen and ’
k
’ will flash on the
video recorder display.
D
If you have put in a cassette which cannot be used
for recording, the video recorder will automatically
eject it.
D
If ’ TIMER FULL ’ appears on the TV screen when
you press the
TIMER
button, you have used up all
the available TIMER blocks. If you want to clear or
check a programmed recording (TIMER block),
select it with the
P
q or
P
r button.
D
Programme numbers ’ E1 ’ and ’ E2 ’ are for
recordings from other sources (through scart socket
EXT.1 AV 1
or
EXT.2 AV 2
).
How to check or change a programmed
recording (TIMER)
a
Switch on the TV set and select the programme number
for the video recorder.
b
Press the
TIMER
button on the remote control twice .
c
Select the programmed recording (TIMER) you want to
check or change with the
P
q or
P
r button.
d
Press the
TIMER
button.
e
Select the entry field with the D/Sr or C/Sq
button.
f
Change any information with the
P
r
or
P
q
button or
with the
0-9
buttons.
g
Confirm with the
OK
button.
h
Make sure that the cassette you have put in can be
recorded on. Switch off with the
TV/STANDBY
m button.
D
The programmed recording will only function when
the video recorder is
switched off with the
TV/STANDBY
m button.
D
The video recorder will always record the
programmed recording at the speed you have
selected
before the recording starts.
How to clear a programmed recording
(TIMER)
a
Switch on the TV set and select the programme number
for the video recorder.
b
Press the
TIMER
button on the remote control twice .
c
Select the programmed recording (TIMER) you want to
clear with the
P
r or
P
q button.
d
Press the
CLEAR (CL),
y
button.
e
Confirm with the
OK
button.
18