Philips Video System Manager Pro Series, Руководство пользователя

Страница: 30 / 50

29 VSM Pro User Guide
Creating a Video Map
Use the following general steps to create a map in VMT (for complete details, refer to the Video
Management Tool User Guide ):
1.
(Optional) Upload a still image to VMT. The software displays the image on a 1024 x 768 grid.
2.
Data Enabler / PDS assignment. There are two assignment methods, placeholder and interactive .
– Placeholder Data Enabler / PDS assignment enables you to create a video map off-
site, prior to installation, without connecting to any lighting system components.
In VMT, you perform placeholder assignment by creating a list of Data Enablers and
Power / Data Supplies using pre-assigned or temporary IP addresses.
– Interactive assignment enables you to automatically discover lighting system
components during installation. Once onsite, connect to the lighting network;
VMT will automatically discover each Data Enabler or PDS and its IP address.
3.
Place fixtures on the grid, then use the tools in VMT to orient the fixtures, change node
order, etc.
4.
Associate each fixture with a Data Enabler or PDS.
5. Name and save the map, then transfer to the VSE Pro controller.
Compatibility
VMT video maps are both backwards and forwards compatible: existing maps created with VMT
1.0 are compatible with VSM Pro, and newly created maps are compatible with the older VSM
hardware. Maps created with the current VMT version and VMT 1.0 both use the use the .FAP
file extension (Fast Map format).
Working with Video Maps
View the Currently Loaded Map
The main menu appears with you connect to the VSM Pro User Interface. The main menu
displays the file name of the currently loaded map.
Note: The main menu display the file names of maps created with VMT 2 only.