1.
Take the camera, system cable and monitor to the area you want to observe (with
the monitor on site, you can check whether the camera covers the required area).
2.
Connect the camera to the system monitor.
3.
Connect the system monitor to the mains.
4.
Switch on the mains power switch.
The monitor will check the system. After a short time the camera image will
appear on the monitor screen.
5.
If necessary adjust contrast /brightness and/or color (See the View Settings menu
of the monitor) to optimize the image on the system monitor.
6.
Hold the camera at the proposed installation position.
7.
Check on the monitor whether the camera covers the required area (The best
results are obtained when the camera is pointed slightly downwards and is not
looking into a bright light source).
8.
Fasten the wall bracket to the wall, or another even and firm surface.
9.
Fasten the camera to the bracket.
10. Direct the camera at the object or area you want to observe. Check the camera
image on the monitor.
Adjust zoom and focus if necessary.
Zoom adjustment: For cameras with a vari-focal lens, first adjust the zoom
lens to zoom in or zoom out. (1)
Focus adjustment: Secondly adjust the focus ring of the camera lens to
obtain optimal image sharpness (2).
Remark
: If still no sharp image is obtained from your CS-mount camera, you should
adjust the back-focus of the camera .
5
Eng
Fig. 1
2
1
Col ob cam ml .qxd 21-Oct-01 11:46 AM Page 5
