background image

Technical Specifications, Connections, and Chassis Overview

EN 2

LCD CMO 2K7

1.

1.

Technical Specifications, Connections, and Chassis Overview

Index of this chapter:

1.1  Introduction
1.2  General
1.3  Specifications

Note:

Specifications are indicative (subject to change).

1.1

Introduction

In this Service Manual you will find all necessary information to 
perform the Board Level Repair (= board swap) scenario on 
LCD panels. The LCD repair manuals are created per brand, 
and they will contain all necessary information for the different 
panels used in Philips flat LCD TVs.

1.2

General

Figure 1-1 CMO module label

1.3

Specifications

Below find attached the data sheets of the different LCD 
panels. Click on the “model number” to open.

Model V315B1-L05

Model V320B1-L05

Model V470H1-L03

MADE IN TAIWAN

E207943

(a) Model Name: V320B1-L05 

(b)  Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc. 

(c)  Serial ID: X X X X X X X Y M D L N N N N

                                     

Serial ID includes the information as below: 

(a)  Manufactured Date: Year: 0~9, for 2000~2009 

Month: 1~9, A~C, for Jan. ~ Dec. 

                                                            Day: 1~9, A~Y, for 1

st

 to 31

st

, exclude I ,O, and U. 

(b)  Revision Code: Cover all the change 

(c)  Serial No.: Manufacturing sequence of product 

(d)  Product Line: 1 -> Line1, 2 -> Line 2, …etc. 

Product Line 

Year, Month, Date

CMO Internal Use

CMO Internal Use

Revision

CMO Internal Use   

Serial No. 

CHI  MEI

OPTOELECTRONICS

X X X X X X X Y M D L N N N N

    V320B1           -L05 Rev. XX 

H_16920_02

3

.ep

s

200407

Содержание V315B1-L05













Отзывы: