3 Get started
Charge the battery
Charging case
Headset
Note
Before you use your headset for the first time,
place the headsets in the charging case and
charge the battery for 3 hours for optimum
battery capacity and lifetime.
Use only the original USB charging cable to
avoid any damage.
Finish your call before charging the headset,
as connecting the headset for charging will
power the headset off.
Connect one end of the USB cable into
the charging case, and another end into
the power source.
• Charging process is verified by the
blue LED light on the front panel,
• When the charging case is fully
charged, the blue light goes on.
• Charging process is verified by white
LED light on the earpieces.
• When the headset is fully charged,
the white light goes off.
Tip
Tip
The charging case serves as a portable backup
battery for charging the headset. When the
charging case is fully charged, it supports 3 full
recharge cycle for the headset.
Normally, a full charge takes 2 hours (for the
headset or charging case).
Pair the headset with
your Bluetooth device at
the fist time
Place the headset in the charging case.
The headset start charging.
Make sure that the headset is fully
charged.
Take both headsets from the
charging case, the headset will
power on automatically, entering
pairing model and Right & Left
headset connected.
There will be a voice “Power on”
and a voice “Pairing”. Then, there
will be a voice “Right channel” on
right headset and “Left channel” on
left headset after paring each other.
The charging case starts charging.
