Philips UM10155 Скачать руководство пользователя страница 11

UM10155_2

© Koninklijke Philips Electronics N.V. 2006. All rights reserved.

User manual

Rev. 02 — 5 September 2006

11 of 12

Philips Semiconductors

UM10155

Discrete Class D High Power Audio Amplifier

7.

Legal information

7.1

Definitions

Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Philips Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.

7.2

Disclaimers

General — Information in this document is believed to be accurate and
reliable. However, Philips Semiconductors does not give any representations
or warranties, expressed or implied, as to the accuracy or completeness of
such information and shall have no liability for the consequences of use of
such information.

Right to make changes — Philips Semiconductors reserves the right to
make changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.

Suitability for use — Philips Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or

malfunction of a Philips Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. Philips Semiconductors accepts no liability for inclusion and/or use
of Philips Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.

Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Philips Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.

7.3

Patents

Notice is herewith given that the subject device uses one or more of the
following patents and that each of these patents may have corresponding
patents in other jurisdictions.

WO 03/090343 — owned by Koninklijke Philips Electronics N.V. (int. patent
application)

7.4

Trademarks

Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.

Содержание UM10155













Отзывы: