Philips TE1.1E AA, Руководство по обслуживанию

Страница: 21 / 50

Electrical Alignments EN 28 TE1.1E 8.
Default setting = 1
Option byte 2 (Op2)
SECAM DK
1: SECAM DK available
0: SECAM DK not available
Default setting = 1
FRANCE
1: FRANCE available
0: FRANCE not
Default setting = 1
SYS-FR
1: System France available
0: System France not available
Default setting = 1
SYS-UK
1: System UK available
0: System UK not available
Default setting = 1
AV2
1: AV2 available
0: AV2 not available
Default setting = 0
AV-S
1: AV-S available
0: AV-S not available
Default setting = 0
AV3
1: AV3 available
0: AV3 not available
Default setting = 0
AV3S
1: AV3S available
0: AV3S not available
Default setting = 0
Option byte 3 (Op3)
JR
1: Stereo volume control via PWM-DACs enabled
0: Stereo volume control via PWM-DACs disabled
Default setting = 0
HP
1: reserved*
0: reserved*
Default setting = 0
Vbar
1: Volume bar OSD enabled
0: Volume bar OSD disabled
Default setting = 1
SubWoof
1: reserved*
0: reserved*
Default setting = 0
Presets
1: Predefined settings are available
0: Predefined settings are not available
Default setting = 1
Lock
1: reserved*
0: reserved*
Default setting = 1
Hotel
1: Hotel mode enabled
0: Hotel mode disabled
Default setting = 0
Option byte 4 (Op4)
16:9
1: 16:9 enabled
0: 16:9 disabled
Default setting = 0
110
1: 110 Deg. Picture tube
0: 90 Deg. Picture tube
Default setting = 0
Hpol
1: Polarity of the Horizontal sync for OSD is negative
0: Polarity of the Horizontal sync for OSD is positive
Default setting = 0
Vpol
1: Polarity of the Vertical sync for OSD is negative
0: Polarity of the Vertical sync for OSD is positive
Default setting = 0
Field
When set, the vertical sync for OSD is in the second half line at
the start of an even field. When not set in the first half line at the
start of an even field.
1: enabled
0: disabled
Default setting = 1
FEOut
1: CVBS signal always present on AV1
0: CVBS signal not always present on AV1
Default setting = 1
Swon
1: Last status enabled
0: Last status disabled
Default setting = 1
VGCheck
When service mode is activated vertical guard is switched off.
1: VG Check enabled
0: VG Check disabled
Default setting = 1
Option byte 5 (Op5)
Clock
1: Clock menu enabled
0: Clock menu disabled
Default setting = 1
AM/PM
1: AM/PM enabled
0: AM/PM disabled
Default setting = 0
AVL
1: Automatic Volume Level enabled
0: Automatic Volume Level disabled
Default setting = 1
1norma
1: reserved*
0: reserved*
Default setting = 0
FLOF-TXT
1: FLOF TXT on
0: FOLF TXT off
Default setting = 1
TR
1: Sound is not muted in weak signals
0: Sound is muted in weak signals
Default setting = 0
P-AND-P
1: Plug and Play enabled
0: Plug and Play disabled
Default setting = 1
Option byte 6 (Op6)
UOC-J
1: reserved*
0: reserved*
Default setting = 0
IgnrSUP
1: Ignore the status of SUP at power on
0: Not ignore the status of SUP at power on
Default setting = 0
Ignr NDF
1: Ignore the status of NDF at power on