Philips TAW8805, Руководство пользователя

Страница: 4 / 12

2
1. Important
Maintenance
• To protect the Philips Smart display
from possible damage, do
not put excessive pressure on
the LCD panel. When moving
the Philips Smart display, grasp the
frame to lift; do not lift the monitor
by placing your hand or fingers on
the LCD panel.
• Unplug the Philips Smart display if
you are not going to use it for an
extensive period of time.
• Unplug the Philips Smart display if
you need to clean it with a slightly
damp cloth. The screen may be
wiped with a dry cloth when the
power is off. However, never use
organic solvent, such as, alcohol,
or ammonia-based liquids to clean
your monitor.
• To avoid the risk of shock or
permanent damage to the set, do
not expose the Philips Smart display
to dust, rain, water, or excessive
moisture environment.
• If the Philips Smart display gets wet,
wipe it with dry cloth as soon as
possible.
• If foreign substance or water gets
in the Philips Smart display, please
turn the power off immediately
and disconnect the power cord.
Then, remove the foreign substance
or water, and send it to the
maintenance center.
• In order to maintain the best
performance of your monitor and
use it for a longer lifetime, please
use the monitor in a location
that falls within the following
temperature and humidity ranges.
• Temperature: 0-40°C 32-104°F
• Humidity: 20-80% RH
Service
• The casing cover should be opened
only by qualified service personnel.
• If there is any need for any
document for repair or integration,
please contact with your local
service center.
Note
Consult a service technician if the
monitor does not operate normally, or
you are not sure what procedure to take
when the operating instructions given
in this manual have been followed.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Caution
The user is cautioned that changes or
modifications not expressly approved
by the party responsible for compliance
could void the user's authority to
operate the equipment.
Note
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.