Philips TAT4205
Philips TAT4205
Note
Note
any previously connected Bluetooth device, it
will automatically switch to pairing mode.
The headset stores 8 devices in the memory. If
you try to pair more than 8 devices, the earliest
paired device is replaced by the new one.
Single headset pairing
(Mono mode)
Pair the headset with
another Bluetooth device
The headset is now in pairing
mode and is ready to pair with a
Bluetooth device (e.g. a mobile
phone).
There will be a voice
“Connected” and LED stays on
for 5 seconds on both headsets.
You can use your device to play
music or make a call.
Turn on the Bluetooth function
of your Bluetooth device, select
Philips TAT4205
.
Enter the headset password
“
0000
” (4 zeros) if prompted.
For those Bluetooth devices
featuring Bluetooth 3.0 or higher,
no need to enter a password.
Turn on the Bluetooth function of
your Bluetooth device.
Take the right/left headset from the
charging case, the earpiece will
power on automatically.
There will be a voice “Power on” from
headset.
Turn on the Bluetooth function on
your device, search for “
Philips
TAT4205
” tap to connect. (Please
refer to P.6)
Once the pairing succeed, you will
hear a voice “Connected” and the
Pair the headset with your
Bluetooth device. Refer to the user
manual of your Bluetooth device.
The following example shows you
how to pair the headset with your
Bluetooth device.
If you have another Bluetooth device
that you want to pair with the headset,
make sure the Bluetooth function in any
other previously paired or coonected
steps in ‘Pair the headset with your
