11
English
EN
2
Press the WPS button on your home
Wi-Fi router.
3
Wait until successful connection of the
speaker to your home Wi-Fi network.
»
The speaker beeps.
»
The Wi-Fi status indicator on the
WPS
button turns off.
»
The system status indicator on the
front panel turns solid green.
Tip
•
Only WPA and WPA2 are supported. If the wireless
security is WEP or no security is applied, the WPS
method does not work.
•
For some Wi-Fi routers, you may need to hold the
WPS button for Wi-Fi connection or enable the WPS
PBC function from the router configuration pages. See
the user manuals of the specific routers for details.
WPS
Option 4: Set up through a
PC/Mac (advanced)
1
Go to your Wi-Fi enabled PC/Mac.
2
Press and hold
SETUP
on the back of
SW700M for more than 3 seconds.
»
Both the system status indicator on
the front panel and the Wi-Fi status
indicator on the
SETUP
button turns
solid amber.
3
Select
:) Philips Setup
from the list of
available Wi-Fi networks on your PC/Mac.
4
After successful connection, open a web
browser on your PC/Mac.
5
Enter
http://philips.speakers
or
172.24.0.1
at the address bar and click the
Enter
key.
6
Make changes on the setup page and
confirm your settings.
»
The speaker beeps.
»
The Wi-Fi status indicator on the
SETUP
button turns off.
»
The system status indicator on the
front panel turns solid green.
